Pelican Case Accessories

Add some extra protection to your Pelican 1010 Micro case with this single foam insert. Provides additional shock absorption to the case contents. Pick'N'Pluck center pieces with 1cm outer rim band....more info

Add some extra protection to your Pelican 1020 Micro case with this single foam insert. Provides additional shock absorption to the case contents. Pick'N'Pluck centre pieces with 1cm outer rim band....more info

Add some extra protection to your Pelican 1030 Micro case with this single foam insert. Provides additional shock absorption to the case contents. Pick'N'Pluck centre pieces with 1cm outer rim band....more info

Add some extra protection to your Pelican 1040 Micro case with this single foam insert. Provides additional shock absorption to the case contents. Pick'N'Pluck centre pieces with 1cm outer rim band....more info

Add some extra protection to your Pelican 1040 Micro case with this single foam insert. Provides additional shock absorption to the case contents. Pick'N'Pluck centre pieces with 1cm outer rim band....more info

Add some extra protection to your Pelican 1060 Micro case with this single foam insert. Provides additional shock absorption to the case contents. Pick'N'Pluck centre pieces with 1cm outer rim band....more info

Replacement O Ring for Pelican Case model 1080. O-rings should be replaced annually or when worn....more info

These Pelican panel frame kits allow the simple attachment of an interface panel to sit flush with the top of the Pelican case. The panel frame kit sits above mounts moulded inside the case walls. A polymer o-ring seals the panel so the case remains water.
Instruction Sheet and Mounting Screw Details

If buying a panel frame kit you may want to purchase a flat panel to go with it. This suits the Pelican 1120 case and has a Black shiny finish. Comes with 4/40" x 0.75" Nylon screws. Panel Thickness is 3mm...more info

1 x Convoluted Lid Foam
1 x Single Layer of open cell Pick'N'Pluck foam
Pick'N'Pluck Foam Height: 5.5cm
Pick'N'Pluck Protective Outer Foam Rim: 1cm
Pick'N'Pluck Prescored Foam Pieces: 1cm x 1cm on top through to 5.5cm.
1 x Base Foam Base Foam Thickness: 1cm

Replacement O Ring for Pelican Case model 1120. O-rings should be replaced annually or when worn....more info

These Pelican panel frame kits allow the simple attachment of an interface panel to sit flush with the top of the Pelican case. The panel frame kit sits above mounts moulded inside the case walls. A polymer o-ring seals the panel so the case remains water.
Instruction Sheet and Mounting Screw Details

If buying a panel frame kit you may want to purchase a flat panel to go with it. This suits the Pelican 1150 case and has a Black shiny finish. Comes with 4/40" x 0.75" Nylon screws. Panel Thickness is 3mm...more info

1 x Convoluted Lid Foam
1 x Single Layer of open cell Pick'N'Pluck foam.
Pick'N'Pluck Foam Height: 6.3cm
Pick'N'Pluck Protective Outer Foam Rim: 1cm
Pick'N'Pluck Prescored Foam Pieces: 1cm x 1cm on top through to 6.3cm
1 x Base Foam Base Foam Thickness: 1

Replacement O Ring for Pelican Case model 1150. O-rings should be replaced annually or when worn....more info

1 x Convoluted Lid Foam
1 x Layers of open cell Pick'N'Pluck foam.
Pick'N'Pluck Foam Height: 3.8cm per layer 
Pick'N'Pluck Protective Outer Foam Rim: 1.4cm 
Pick'N'Pluck Prescored Foam Pieces: 1.4cm x 1.4cm on top through to 3.8cm.
1 Layer of Base Lid Foam 1cm Thick

Replacement O Ring for Pelican Case model 1170. O-rings should be replaced annually or when worn....more info

These Pelican panel frame kits allow the simple attachment of an interface panel to sit flush with the top of the Pelican case. The panel frame kit sits above mounts moulded inside the case walls. A polymer o-ring seals the panel so the case remains water.
Instruction Sheet and Mounting Screw Details

If buying a panel frame kit you may want to purchase a flat panel to go with it. This suits the Pelican 1200 & 1300 case and has a Black shiny finish. Comes with 6/32" x 1" Nylon screws. Panel Thickness is 3mm...more info

1 x Convoluted Lid Foam
1 x Single Layer of open cell Pick'N'Pluck foam.
Pick'N'Pluck Foam Height: 6.4cm
Pick'N'Pluck Protective Outer Foam Rim: 1cm
Pick'N'Pluck Prescored Foam Pieces: 1cm x 1cm on top through to 6.2cm.
1 x Base Foam Base Foam Thickness: 1cm

Replacement O Ring for Pelican Case model 1200 & 1300. O-rings should be replaced annually or when worn....more info

This purge valve is the old style valve released when pelican first brought out its case range. Because Pelican cases are so tough they are all still around today. No need to worry if you lose the purge valve, we have them right here to get you back on tr...more info

Pelicans new automatic purge valve requires no action from the users. It designed to keep moisture particles out whilst maintaining equal air pressure inside the case....more info

This brass lug is used with the Manual Purge Screw. If you are removing the Auto Purge for a Manual one you will need this part as well....more info

This O-Ring sits inside the 1209 old screw style purge valve....more info

Anti-Static Foam to suite the Pelican 1300 Hard Case - 3 slots designed to support up to 3 standard IDE hard drives....more info

1 x Convoluted Lid Foam
2 x Layers of open cell Pick'N'Pluck foam.
Pick'N'Pluck Foam Height: 5.6cm x 2 = 11.2cm overall
Pick'N'Pluck Protective Outer Foam Rim: 1.3cm
Pick'N'Pluck Prescored Foam Pieces: 1.3cm x 1.3cm on top through to 5.6cm per layer.
1 x Base Foam

High Density Foam insert to suite the Pelican 1400 Hard Case - Designed to support SLR Cameras. Includes Lid foam Centre Foam and base foam....more info

These Pelican panel frame kits allow the simple attachment of an interface panel to sit flush with the top of the Pelican case. The panel frame kit sits above mounts moulded inside the case walls. A polymer o-ring seals the panel so the case remains water.
Instruction Sheet and Mounting Screw Details

If buying a panel frame kit you may want to purchase a flat panel to go with it. This suits the Pelican 1400 case and has a Black shiny finish. Comes with 6/32" x 1" Nylon screws. Panel Thickness is 3mm...more info

1 x Convoluted Lid Foam
1 x Single Layer of open cell Pick'N'Pluck foam.
Pick'N'Pluck Foam Height: 8.9cm
Pick'N'Pluck Protective Outer Foam Rim: x1cm
Pick'N'Pluck Prescored Foam Pieces: 1.5cm x 1.5cm on top through to 8.9cm per layer.
1 x Base Foam Base Foam

Replacement O Ring for Pelican Case model 1400. O-rings should be replaced annually or when worn....more info

These Pelican panel frame kits allow the simple attachment of an interface panel to sit flush with the top of the Pelican case. The panel frame kit sits above mounts moulded inside the case walls. A polymer o-ring seals the panel so the case remains water.

1 x Convoluted Lid Foam 3 x Layers of open cell Pick'N'Pluck foam Pick'N'Pluck Foam Height: 6.9cm per layer Pick'N'Pluck Protective Outer Foam Rim: 1.2cm Pick'N'Pluck Prescored Foam Pieces: 1.3cm x 1.3cm on top through to 6.9cm per layer. 1 x Base Foam Ba...more info

1430 Shoulder strap. This is only for the Pelican 1430 case. It does not fit onto other cases....more info

Replacement O Ring for Pelican Case model 1440. O-rings should be replaced annually or when worn....more info

The 1435 Padded Divider set is designed to fit into the Pelican Hard Case Model 1430. The dividers span the entire length of the case and are complimented by a varying size of subdivides. Velcro edges make it easy to reposition into the space and size you...more info

???????...more info

Made from waterproof ballistic Nylon with Nylon zippers. This lid organiser has a multitude of sections to secure your camera peripherals. Installs with stainless steel screws into the lid anchor points. Add some style to your case with this 1430 lid orga...more info

1 x Convoluted Lid Foam 4 x Layers of open cell Pick'N'Pluck foam. Pick'N'Pluck Foam Height: 7.9cm per layer Pick'N'Pluck Protective Outer Foam Rim: 1cm Pick'N'Pluck Prescored Foam Pieces: 1.4cm x 1.4cm on top through to 7.9cm per layer. 1 x Base Foam Bas...more info

Replacement O Ring for Pelican Case model 1440. O-rings should be replaced annually or when worn....more info

The 1445 Padded Divider set is designed to fit into the Pelican Hard Case Model 1440. The dividers span the entire length of the case and are complimented by a varying size of subdivides. Velcro edges make it easy to reposition into the space and size you...more info

???????...more info

Made from waterproof ballistic Nylon with Nylon zippers. This lid organiser has a multitude of sections to secure your camera peripherals. Installs with stainless steel screws into the lid anchor points. Add some style to your case with this 1440 lid orga...more info

These Pelican panel frame kits allow the simple attachment of an interface panel to sit flush with the top of the Pelican case. The panel frame kit sits above mounts moulded inside the case walls. A polymer o-ring seals the panel so the case remains water.
Instruction Sheet and Mounting Screw Details

If buying a panel frame kit you may want to purchase a flat panel to go with it. This suits the Pelican 1450 case and has a Black shiny finish. Comes with 6/32" x 1" Nylon screws. Panel Thickness is 3mm...more info

1 x Convoluted Lid Foam
1 x Single Layer of open cell Pick'N'Pluck foam.
Pick'N'Pluck Foam Height: 8.7cm
Pick'N'Pluck Protective Outer Foam Rim: 1cm
Pick'N'Pluck Prescored Foam Pieces: 1.2cm x 1.2cm on top through to 8.7cm.
1 x Base Foam Base Foam

Replacement O Ring for Pelican Case model 1450. O-rings should be replaced annually or when worn....more info